Owner's manual

1-4
IM WX1-05E
System Configuration
TCP/IP connection
Monitor server protocol
Data transfer
Remote monitor
Converter
PV
SP
SP 2 3 4
MANAL 1 2 3
SET/E NT
A/M
Modbus/TCP devices
JUXTA
(VJET),
Temperature
controllers
EthernetEthernet
Modbus/RTU devices
GateMODBUS
RS-422-A/RS-485
It is recommended that you run GateMODBUS and DAQLOGGER on separate PCs
depending on the number of devices that the system supports and other factors affecting
the load.
Software Configuration
DAQLOGGER
Ethernet
Ethernet
GateMODBUS
Environment setting
functions
Displays execution
and connection
status
Writes to file
Environment
settings file
File read out
Status information
Executable
function
Remote Monitor
Modbus devices
Modbus/RTU
Modbus/TCP
GateMODBUS Configurator consists of two separate software functions. The role of
each function within the configurator is as follows:
• Environment Sett
ing Functions
Used to dene model names, communication methods, and other parameters required
for running the executable function.
And operates in conjunction with the environment setting functions to display the
practice status and connection status of DAQLOGGERs and Remote Monitors.
• Executable Function
The software reads data from the Modbus devices at xed inte
rvals. It also acts as a
monitor server, transferring data to DAQLOGGER and Remote Monitor.
1.2 System Overview