Owner manual

2-69

IM WX103-01E

Index

Logger

• Full Zone

Displays all the waveforms over the full zone of the waveform display area regardless

of the Zone settings on the General Display Settings window. A single Y-axis scale of

the active waveform is displayed.

Select full zone

Waveform display area (full zone)

• Slide Zone

Displays the waveforms by slightly offsetting the display position of each waveform

vertically regardless of the Zone settings on the General Display Settings window. A

single Y-axis scale of the active waveform is displayed.

Select slide zone

Slide in this manner

• Auto Zone

Displays the waveforms by dividing the waveform display area evenly according to

the number of displayed waveforms regardless of the Zone settings on the General

Display Settings window.

Select auto zone

Divided evenly automatically

• Multi-Axes Zone

All the Y-axes of the displayed waveforms are aligned horizontally. To hide a Y-axis,

clear the Y-Axis check box on the General Display Settings window. The display zone

is set to the position specied by Zone on the General Display Settings window.

Turn OFF the Y-axis

display of Ch00002

The scale of Ch00002 is not displayed.

Select multi-axes zone

Click the bar to move the

specified Y-axis to the left end

Indicates the active Y-axis

2.10 Starting/Stopping Data Monitoring and Displaying the Monitor