Owner manual

2-51

IM WX103-01E

Index

Logger

Click the Pattern tab.

Stop output

Pause output

(the PAUSE display appears)

Click the output pattern button to start pattern output

Select to output continuously or a specified number of times

Output value display

Displayed output pattern

Note

The Repeat check box in the User Output space is selected when the Default box under

Pattern Output (Loop Setting) in the channel settings is turned ON.

• Manual

1. Click the Pattern tab in the User Output space.

2. To change the output value, turn the rotary switch icon by dragging it to the left or

right, click a direction key, or type a value directly into the output value display box.

Click the Manual tab.

Drag with the cursor to turn the rotary switch icon to the left and right

Turning the rotary switch icon*

You can also turn the rotary switch icon by

holding down the Ctrl key (or Shift key)

and turning the mouse wheel.

Click a direction key to change the output value

Output value display (can also be used for direct input)

Overview of Output during When Transmit Is Set

Measurement start Measurement stop Measurement restartsPower ON

Output

value

Value held

Operation Status of Transmission Output by Communication Status

Operation of analog output, PWM output and other forms of transmission output depend

on the communication status as follows.

• For transmission output within the same unit, the operation does not depend on the

communication status.

• For computation or transmission from other units, if communication is broken the

operation is that specied for Error under

Specied Output.

• For user output, if communication is broken the operation is that specied for Error

under Specied Output.

2.8 Analog/PWM Output Settings