Manual

2-12
IM WX83-01E
• Changing the Line Thickness
You can change the line thickness of the displayed waveform. The default setting is
Normal Line.
2.
Click the Normal Line, Medium Line, or Thick Line button on the toolbar.
Medium Line
Thick Line
• Changing the Grid Display
You can select one of three grid types.
Switch the grid density
• Applying a Display Limit (Clip)
You can specify how waveforms outside of the display range are displayed.
2.
Click the Clip button on the toolbar.
With Limit Applied
Without Limit Applied
The displayed area of the waveform along the y-axis is limited by the specified
minimum and maximum range values. Measured values lower than the minimum
are displayed at the minimum value of the scale, and values higher than the
maximum are displayed at the maximum value of the scale.
2.6 Changing the Trend Graph Display Method