Instruction Manual

2-3
IM WX102-01E
1
2
3
4
5
6
7
8
9
10
11
Index
Communication Software
2.2 Making Project Settings
Changing/deleting Project settings
1
To open the Project Settings dialog box you should first close all DAQ 32 Plus
software. Open the Project Settings dialogbox by clicking the Project Settings icon
or click the Menu button and select Project settings... .
2
Select the Project you desire to change or delete from the Select Project pull-
down menu.
If the Password Protection wasn’t activated the Project Settings dialogbox of the
selected Project will appear. If Password Protection is active a dialog will first
appear in which you should enter the password.
Click OK to open the selected Project.
3
To alter Project Settings just repeat step 4 to 9 above.
4
To erase Project Settings click Delete, and confirm or cancel deletion in the
message box that appears.
Note
• One last Project cannot be deleted.
• One unprotected Project will always remain.