Instruction Manual

4-60

IM WX102-01E

4.33 Saving Setting Data

Save the DARWIN Hardware Configurator settings as follows:

Select File > Save, or Save As... from the menubar. You may also use the save

icon

If you choose Save As... you will be requested to select where to save the file to,

and to enter a File name and Comment. After this click the Save button.

Comment

Saved data info

File name

Select a file type

(same as the to

be saved file)

Saving direction

File overview

• Depending on the kind of data, the below extensions will automatically be

added to le names.

.ast : for a DA100 settings data le.

.rst : for a DR settings data le.

.cst : for a DC100 settings data le.

.set :

for a data le containing SET (Regular) Settings created with a DC100

or DR.

.pnl : for a data le containing SETUP (Basic) Settings created with a DC100

or DR.

•

A Comment can only be set for DA 100 (.ast), DR (.rst), and DC100 (.cst) data

les.