Manual

2-7
IM WX1-03E
1
2
3
Index
Operating Procedure
2.3 Connecting from DAQLOGGER or Remote
Monitor
While the executable function is running, DAQLOGGER or Remote Monitor works via
Ethernet to log and monitor the data that the WT is acquiring. GateWT’s executable
function acts as the client of a DAQLOGGER or Remote Monitor that is running as the
monitor server.
In this case, system numbers are assigned as follows:
WT assigned to WT01 : 0
WT
assigned to WT02 : 1
Connecting from DAQLOGGER
Procedure
See section 2.6 of the WX101 DAQLOGGER WX81 DAQLOGGER Client Package
User’s Manual (IM WX101-01E).
Note
• If a connection is made with GateWT when DAQLOGGER’s system server setting is set to
No system number, the connected WTs are handled on the same system. For example,
if a GateWT with two WTs connected is set to No system number on DAQLOGGER,
DAQLOGGER handles both units channels as a single connected GateWT.
• When recorder model determination is performed by DAQLOGGER, models numbered 01
under GateWT’s “WT Setting” are displayed as No. 00. To identify models numbered 02 or
higher, specify the system number on DAQLOGGER. For example, for number 02, specify
01 under System No.
Connecting from Remote Monitor
Procedure
See section 8.1 of the WX101 DAQLOGGER WX81 DAQLOGGER Client Package
User’s Manual (IM WX101-01E), or section 9.2 of the WX102 DAQ32Plus WX82
DAQ32Plus Client Package User’s Manual (IM WX102-01E).