User guide
9-4
IM WX101-01E
Warning
Code Warning message What to do
W3431 Memory may be initialized. Continue sending data? If necessary, save the data in the data memory onto a
medium before sending data.
W3433 This file does not fit settings made with DAQLOGGER
Software Configurator. Continue?
Use the Software Configurator to check the model
information set.
W3434 This setting is initialized. OK?
— — — —
W3435 System configuration is changed. Setting is initialized.
OK?
— — — —
W3436 Hardware and software configurations don't match.
Continue to send?
— — — —
W3437 Hardware model doesn't match software setting.
Continue sending?
— — — —
W3438 Hardware and Software configurations don't match.
Continue sending data?
— — — —
W3439 Style numbers don't match. Continue sending?
— — — —
W3440 Hardware and Software options don't match.
Continue sending?
— — — —
W3441 This is a reference channel. Channels referring to this
channel will be changed too!
— — — —
W3442 Settings of other power module channels will be changed
too!
— — — —
W3443 Some data couldn't be read.
— — — —
W3444 Some existing data were changed.
— — — —
W3445 Writing operation was changed.
— — — —
W3446 Some channels out of the copy range will be changed
too!
W3447 The digital print settings of some measurement and math
channels have been changed.
— — — —
W3448 The relay settings of some measurement and math
channels were set OFF.
— — — —
W3449 Some Event/Action settings have been changed.
— — — —
W3450 Following the change of temperature unit, SET (Regular)
settings have been initialized.
— — — —
W3451 This file does not fit system settings made with
DAQLOGGER Software Configurator. Continue?
— — — —
W3452 Contains invalid data. Open this setting?
— — — —
W3453 All program pattern configuration will be initialized.
Continue?
— — — —
W3454 This pattern configuration will be initialized.Conutinue?
— — — —
Message
Code Message What to do
M3461 Some channels could not be copied.
— — — —
M3462 Communication was successful.
— — — —
M3463 Communication was cancelled.
— — — —
M3464 Communication was aborted.
— — — —
M3465 Continue to send?
— — — —
M3467 Add Unit?
— — — —
M3468 Delete Unit?
— — — —
M3469 Initial balancing failed.
— — — —
9.1 Error Messages and Their Corrective Actions