User guide

8-3
IM WX101-01E
1
2
3
4
5
6
7
8
9
Index
Using DAQLOGGER Client Package
Connect to a server by opening the connection settings file
1. Select “Open” from the “File” menu. The “Open” dialog box opens.
2. Select a le and click “Open.” The dialog box closes and the “Trend” monitor window
is displayed.
3. Click “Connect/Disconnect” on the toolbar or select “Connect” from the “File” menu.
A connection is made to the server, and data are displayed on the monitor window
.
Connecting to another server
1. Select “New” or “Open” from the “File” menu and carry out the steps described
in “Making a new connection” or “Connect to a server by opening the connection
settings le” described before.
Note
You can connect up to 16 servers.
Pausing/Resuming the Monitor
Pauses the updating of the display in the monitor window. The data continue to be
retrieved while the monitor is paused. Therefore, when the monitor is resumed, the data
retrieved while the monitor was the pause are also displayed.
Procedure
1. Click the monitor window you wish to pause so that it is displayed in front.
2. Click “Pause” on the toolbar or select “Pause” from the “File” menu.
Note
Only the monitor of the selected connection settings is paused.
3. To resume the monitor, click “Pause” again or select “Pause” from the “File” menu.
8.1 Starting the Remote Monitor/Connecting to the Server