User guide
7-268
IM WX101-01E
For DR, DC
Procedure
1. Load data from the settings le created by the recorder.
In the menu bar of the “DAQLOGGER Hardware Congurator” window, select “File”-
“File Import.” The “Open File” dialog box appears.
(File names)
2. Checkmark the “Overwrite” (Overwrite function, see below) if you want to overwrite
the le currently being edited, without changing system congurations.
The Overwrite function
If you open a file from the File list without using the Overwrite function, the file will be
opened, clearing the data earlier edited open file, including its system configurations.
If you use the Overwrite function when opening a file from the File list, the file will be
opened, overwriting the data settings edited so far. System Configurations of the file
edited so far will remain the same. If overwriting results in system inconsistencies, the
entire file may be impossible to open.
•
Caution when loading a SET mode file (.pnl) saved to a DC100/DR internal
floppy disk.
If you open a SET mode le from a DC100/DR oppy disk, system info will not be
included, and therefore it may be impossible to open the data using the overwrite
function.
T
o prevent this from happening, do the following:
A. Open the SETUP mode le (which belong to the SET mode le to be imported)
without using the Overwrite function.
A dialog box for system conguration
conrmation will appear.
B. Synchronize the system congurations and open the le.
C. Checkmark the “Overwrite” and open the SET (Regular) settin
gs.
7.13 Handling Setting Data Using a Floppy Disk