User guide

7-131
IM WX101-01E
1
2
3
4
5
6
7
8
9
Index
Setting the Recorder
7.8 Setting MV1000/MV2000
Trip line
Set lines at specified positions in the waveform display range on the Trend display.
• Use
Turn [ON] the trip lines you want to display.
• Position
Set the position in the range of 0 to 100% of the display width.
• Color
The default colors are red, green, blue, and yellow. If you want to change the color,
select from the 24 available colors.
• Trend Line
Set the line width of the trip line in dots (1 to 3).
Display
Trend interval [/div]
Specify the trend/storage interval (sampling interval and recording interval) in terms of
time per division on the time axis. You cannot choose a sampling interval that is faster
than the scan interval. See the table under “Save Interval” below.
High-speed model:
5s, 10s, 15s, 30s, 1min, 2min, 5min, 10min, 15min, 20min, 30min,
1h, 2h, 4h, 10h
Medium-speed model**: 15s*, 30s, 1min, 2min, 5min, 10min, 15min, 20min, 30min, 1h,
2h, 4h, 10h
* Only during fast sampling mode.
** You cannot use fast sampling mode on models with the external input channel (/MC1) option.