User guide

2-9
IM WX101-01E
1
2
3
4
5
6
7
8
9
Index
Configuring the DAQLOGGER
Setting Password Protection
Password protection is a function to limit operation as shown below, regardless of the
project’s operation level.
Function Protection OFF Protection ON
Logging Software Follows project’s operation level. All operation disabled
Data Monitor Follows project’s operation level. Setting change/save disabled
Historical Viewer Follows project’s operation level. No limitation
DDE Server Follows project’s operation level. All operation disabled
Monitor Server Follows project’s operation level. All operation disabled
Report Generator Follows project’s operation level. All operation disabled
Group Editor Follows project’s operation level. Cannot start
Hardware Configurator Follows project’s operation level. Cannot start
Tag Editor Follows project’s operation level. Cannot start
Software Configurator Follows project’s operation level. Cannot start
File Utility Follows project’s operation level. No limitation
Event Processor Follows project’s operation level. All operation disabled
Control Server Follows project’s operation level. All operation disabled
T
o set up password protection, first specify the use of password function then set the
password protection to ON.
Setting password function
Specifying the use of password function
Procedure
1. In the menu bar of the “DAQLOGGER Manager” window, select “File” then “Project
Setting.” The “Project Setting” dialog box appears.
2. Click the check box of “Use Password Protection” to select it. The “New Password
Setting” dialog box appears.
2.5 Setting the Security