User guide

7-108
IM WX101-01E
Server Function
• Use
Select [Use] or [Not] (don’t use).
• Web server Use
For the Web item under Server, select [Use] or [Not] (don’t use). When [Use] is
selected, the Web page item is added to the basic setting mode menu.
• Operator
To set the operator page, select [ON].
• Operator Access Control
To use access control, select [ON]. You must enter a user name and password to
display the operator page. You must select [Login] as [Key Security] or [Comm.
Security] under [Environment] - [Detail Setting] in the [Basic Setting] tab, and
register users under the [User Registration]. On DXs with the /AS1 advanced
security option, perform the [Login] settings on the DX.
• Command
To write messages, select [ON]; Otherwise, select [OFF]. This setting is xed at [Not]
on DXs with the /AS1 advanced security option.
• Monitor
To display the monitor page on a browser, select [ON]; otherwise, select [OFF].
• Monitor Access Control
Same as the Operator Access Control.
• SNTP Server Use
select [Use] or [Not] (don’t use).
• Modbus Server Use
select [Use] or [Not] (don’t use).
• EtherNet/IP (Release number 3 or later)
Select whether or not to use the DX as an EtherNet/IP server. Select [Use] or [Not] (don’t
use).
7.7 Setting DX1000/DX2000