User guide
7-102
IM WX101-01E
E-mail
Set the SMTP server and mail address.
• SMTP server name
Enter the host name or IP address of the SMTP server.
• Port No.
Unless specied otherwise, set the number to the default value. The default value is 25.
• Security (Release number 3 or later)
Select [POP before SMTP] if you need to enable POP before SMTP. To enable
authenticated e-mail transmission (Authentication SMTP), select [Auth] (release
numbers 4 and later).
• Address 1, Address 2
Enter the e-mail address. Multiple e-mail addresses can be entered in the box of one
recipient. When entering multiple addresses, delimit each address with a space. Up
to 150 characters can be entered.
• Sender
Enter the sender e-mail address. You can enter up to 64 characters.
POP3 settings (Release number 3 or later)
• POP3 Server name and Port number
Enter the POP3 server host name or IP address.
• Port number
Use the default setting unless you need to change it. The default value is 110.
• Login name
Enter the POP3 server login name.
• Password
Enter the POP3 server login password using up to 32 characters. An entered
password is displayed as “********.”
7.7 Setting DX1000/DX2000