User guide

7-99
IM WX101-01E
1
2
3
4
5
6
7
8
9
Index
Setting the Recorder
Setting the FTP connection destination
Consult your network administrator when setting parameters such as the primary/
secondary FTP servers, port number, login name, password, account, and availability of
the PASV mode.
• Primary, Secondary
You can specify two destination FTP servers, [Primary] and [Secondary]. If the
primary FTP server is down, the le is transferred to the secondary FTP server.
• Server Name
Enter the name of the le transfer destination FTP server using up to 64 alphanumeric
characters.
• If the DNS is used, you can set the host name as a server name.
• You can also set the IP
address. In this case, the DNS is not required.
• Port No.
Enter the port number of the le transfer destination FTP server in the range of 1 to
65535. The default value is 21.
• Login Name
Enter the login name for accessing the FTP server using up to 32 alphanumeric
characters.
• Password
Enter the password for accessing the FTP server using up to 32 alphanumeric
characters. An entered password is displayed as “********.”
• Account
Enter the account (ID) for accessing the FTP server using up to 32 alphanumeric
characters.
• PASV
Select [ON] when using the DX behind a rewall that requires the passive mode. The
default setting is [OFF].
• Initial Path
Enter the directory of the le transfer destination using up to 64 alphanumeric
characters. The delimiter for directories varies depending on the implementation of
the destination FTP server.
Example:
When transferring les to the “data” directory in the “home” directory of
an FTP
server on a UNIX le system.
/home/data
If the le transfer to both primary and secondary destinations fails, the DX aborts
the le transfer. When the connection recovers, the DX transfers the data that could
not to be transferred in addition to the new data le. However, since the data that is
transferred resides in the internal memory of the DX, if the data is overwritten, the
data that could not be transferred is lost.
7.7 Setting DX1000/DX2000