User guide

7-5
IM WX101-01E
1
2
3
4
5
6
7
8
9
Index
Setting the Recorder
7.3 Editing the Setting Parameters
Selecting the Recorder
Procedure
1. In the “Recorder List” window, click the “No.” cell of the recorder for which you wish
to change settings.
The settings window of the selected recorder appears on top.
If DARWIN (DA, DR, or DC) is selected and the system conguration or subunit/
module conguration on the Hardware Congurator is different from the system
conguration or subunit/module conguration that was specied in the Software
Congurator, the following message is displayed.
If you select “Y
es,” the setup parameters of the recorder contained within the
Har
dware Congurator are loaded and the “Setting” window opens. If you select “NO,”
the “Setting” window is opened with the initial system conguration and module
conguration of the Software Congurator.
2. From here, recorder settings operations follow. The operations are classied into
eight types as shown below by the series of recorders.
Type Model
VR series VR100, VR200, VR200 S2
µR series µR1000, µR1800
DX series DX100, DX200, DX200C, DX1000, DX2000
MV series MV100, MV200, MV1000, MV2000
CX series CX1000, CX2000
DA DA100
DR DR130, DR200
DC DC100
Regarding the settings window and its operation of each type, see the following
pages.