User guide

7-2
IM WX101-01E
“Setting” windowwhen “Setting” windows are displayed
The following operations can be carried out using the Hardware Configurator.
• Read setup parameters from the recorder via communications
For the operating procedure, see section 7.2.
For limitations on each model, see “
Hardware Congurator” in section 1.1.
• Write setup parameters to the recorder via communications
For the operating procedure, see section 7.11.
For limitations on each model, see “
Hardware Congurator
” in section 1.1.
• Edit the setup parameters
For the operating procedure, see sections 7.3 through 7.10.
You
can also create setup parameters by changing the system conguration (presence
or absence of options, for example) and subunit/module conguration (for DARWIN)
of a recorder.
•
Read setup parameters that were created on a recorder through a oppy disk.
For the operating procedure, see section 7.13.
For limitations on each model, see “
Hardware Congurator” in section 1.1.
•
Write setup parameters that were created to a recorder through a oppy disk.
For the operating procedure, see section 7.13.
For limitations on each model, see “
Hardware Congurator
” in section 1.1.
• Save the setup parameters
For the operating procedure, see section 7.14.
Sav
es the setup parameters to the hard disk. Save the setup parameters occasionally
while editing the parameters.
• Print the setup parameters
For the operating procedure, see section 7.15.
• Initialize the setup parameters
For the operating procedure, see section 7.12.
• T
ransmit control commands to a recorder
For the operating procedure, see section 7.16.
Through control commands, you can change the date and time, start the recording
operation, and other operations.
• Start/Stop the DARWIN report function, execute balancing
For the operating procedure, see section 7.17.
7.1 Starting the Hardware Configurator