Owner's manual

8-29

IM WX104-01E

Index

Configuring the CX1000/CX2000

Partial

Expand(%)

The boundary value is displayed as a percentage along the width of the display, between

1 and 99%.

Boundary

The setting conditions depend on the internal control channel and external control

channel as follows:

• Internal contorol channel

PV/SP: EU (0%) < boundary value < EU (100%)

OUT:

EU (–5.0%) < boundary value < EU (105.0%)

However, for retransmission OUT, minimum span value < boundary value < maximum

span value

• External contorol channel

span L < boundary value < span U

However, when external loop is of

f, the partial expansion/reduction is also off.

Note

• The partial expansion/reduction settings are valid when [Partial] is set to [Use] in [Aux] of the

[Setup] tab.

• For the external control channel, set a boundary within the span determined by the internal

span -50–1050 and the specified decimal point. Normally there is one decimal place, so it

can be set to -5.0% < boundary < 105.0%.

Color

For each channel you can choose from 16 colors.

8.5 Control Channel Settings (Internal/External)