Owner's manual

1-6
IM WX104-01E
With the MV1000
Enter an IP address and host settings with the following procedure.
• Press the MENU key, then click Menu tab > Basic setti
ng mode > Menu tab >
Communication (Ethernet) > IP address. Enter the IP address.
• Press the MENU key, then click
Menu tab > Basic setti
ng mode > Menu tab >
Communication (Ethernet) > Host settings. Enter the host settings.
With the MV2000
Press the MENU key, then click Menu tab > Basic setting mode > Menu tab >
Communication (Ethernet) > IP address, Host Settings. Enter the IP address and
host settings.
Note
• In using this software, the DNS, domain name, and suffix search order do not need to be
configured.
• You can check and save the configuration using the TCP/IP menu of the Configurator.
• If you change the IP address, make sure to reboot the DX/MV/CX.
1.3 Configuring the Network