Owner's manual
6-61
IM WX104-01E
1
2
3
4
5
6
7
8
9
Index
Configuring the DX1000/DX2000
Connect limits (Release number 3 or later)
Modbus Server
• Connect limits
Select [ON] to place connection limits.
• Allowed IP Address
If you want to only allow certain IP addresses to connect to the DX Modbus server, set
[Use] to [ON] and enter IP addresses (in the range of 0.0.0.0 to 255.255.255.255) in
the [Allowed IP Address] boxes. You cannot enter host names.
Only the IP
addresses specied here can connect to the DX Modbus server.
6.5 Entering Basic Settings