Manual

3-4
IM WX1-08E
Monitor Server Function
When the software is running, you can connect from DAQLOGGER or Remote Monitor
via Ethernet using the remote monitor protocol, and acquire data. In this case, system
numbers are assigned as follows:
µR10000/µR20000/SR10000 assigned to No. 01:
0
µR10000/µR20000/SR10000 assigned to No. 02: 1
Software Status Display
You can display the status of the software.
The information from the software that can be displayed is as follows:
• Connection status from the client
Displays a list of PCs running DAQLOGGERs and Remote Monitors with which the
software has opened a connection.
• Communication status with connected recorders
• Error Messages
S
h
ows the presence or absence of errors occurring in communication with the recorder.
Test Acquisition
You can perform a test acquisition on each tag using the software. During the test
acquisition, data is read from recorder channels and is displayed as digital values. This
allows you to determine whether the settings for each tag are correct.
The test acquisition gets values from assigned tags approximately at one-second
intervals.
Channel Numbers Assigned to Tag Numbers
Tag numbers are set as follows according to the µR10000/µR20000 type.
• Pen model TAG01-TAG12 (µR10000), TAG01-TAG12 (µR20000),
TAG01-TAG04 (SR10000)
•
Dot model
TAG01-TAG18 (µR10000), TAG01-TAG48 (µR20000),
TAG01-TAG06 (SR10000)
Also, channels are assigned as follows:
Channel Numbers Assigned to Tag Numbers (for a Pen Model with One Measurement
Channel and Eight Computations Channels)
Tag No. Channel number
TAG01 01
TAG02 0A
TAG03 0B
TAG04 0C
TAG05 0D
TAG06 0E
TAG07 0F
TAG08 0G
TAG09 0J
Channel Colors
The default channel colors on the software are the following sixteen colors.
Red, Green, Blue, Magenta, Orange, Cyan, Brown, LightGray, Purple, Pink, Yellow,
White, CaditBlue, LightPink, LightGreen, Salmon
These can be changed.
3.2 Details of Functions