Manual

3-2
IM WX1-08E
3.2 Details of Functions
Serial Port
The communications ports available to the software are the COM1–COM9 serial ports.
To connect to a recorder via serial communication, the user must enter the following
settings for the port to be used.
•
Use/Do not use (ON/OFF)
• Baud rate: Select 4800, 9600, 19200, or 38400 bps
•
Parity: Choose NONE, ODD, or EVEN
RS-422A/485 Communications
The software can use RS-422A/485 addresses 1–30.
Recorder Settings
The software can open connections with sixteen recorders simultaneously.
The user must enter the following settings on the software for the recorders to be
accessed.
•
Choose a communication method (COMx or Ethernet)
When COMx is selected, set up the recorder as follows.
Protocol: NORMAL
Date length: 8 bit
•
Address number (for ports set to COM)
• IP address or host name (if Ethernet is selected for the port)
• User name (if Ethernet is selected for the port)
• Password (if Ethernet is selected for the port)
• Automatic model determination
• For instructions on entering settings on the recorder itself, see the µR10000/µR20000/
SR10000 User’s Manual.