Manual

2-9
IM WX1-08E
1
2
3
Index
Operating Procedure
2.5 Displaying the Execution Status and
Reconnecting
Procedure
Displaying the Connection Status
1.
Click the Monitor/Status tab or choose View > Monitor/Status from the menu
bar.
The Monitor/Status tab is displayed, showing which recorder is connected and
with which PC.
Displays the names of connected clients
Indicator for the communication
status with the connected device
Green: Normal (comm. open)
Red: Communication error
Yellow: Data lost, other
(communication paused)
No display: Communication error
(comm. paused)
Double-click to display the Error
Indicator dialog box
Viewing Error Detail
2.
Double-click Status under Communication Status on the Monitor/Status tab.
The Error Message dialog box opens.
See section 3.3 for error messages.
Note
Click the Start button to download data from the connected devices. The interval at which data
is acquired is determined by the acquisition interval on the Acquisition Setting tab. If Retry is
turned OFF and a connected device experiences an error while running, data acquisition stops
on the next interval. To restart acquisition, reconnect using the procedure below.