Manual

2-8
IM WX1-08E
2.4 Starting and Stopping Acquisition, and Starting
Acquisition upon Startup of the Software
Starting/Stopping Acquisition from the Menu Bar
Procedure
Starting Acquisition
1.
Click the Start button on the toolbar. Or, choose Monitor > Start from the menu bar.
Acquisition on the software is started. The communication status of each device is
displayed under Connected Device Communication Status in the Monitor/Status tab.
Start button
Stop button
Stopping Acquisition
1.
Click the Stop button on the tool bar or choose Monitor > Stop from the menu bar.
Starting/Stopping Acquisition from the Monitor/Status Tab
Procedure
1.
Click the Monitor/Status tab or choose View > Monitor/Status from the menu bar.
The Monitor/Status tab is displayed.
Select to start acquisition
simultaneously upon startup
of the software
Starting Acquisition
2.
Click the Start button.
Communication with the device set up in the Recorder Setting tab starts.
Stopping Acquisition
2.
Click the Stop button.
Communication with the device stops.
Starting the Software and Data Acquisition at the Same Time
Procedure
1
When you turn ON “Start monitor at startup” in the Monitor/Status tab, data
acquisition starts according to the saved environment settings the next time (and
simultaneously with) the software is started.