Manual

2-5
IM WX1-08E
1
2
3
Index
Operating Procedure
Test Execution
6.
Click the Test Start button in the Tag Setting dialog box.
The test result is displayed in the Value column, and the current values can be
monitored.
Stopping the Test Execution
7.
Click the Test Stop button.
Acquisition Interval and Retry Settings
Procedure
1.
Click the Scan Interval Setting tab or choose View > Scan Interval Setting from
the menu bar.
The Scan Interval Setting tab is displayed.
Setting the Acquisition Interval
2.
Enter a setting within the following range into the Acquisition Interval box.
Setting range: 0.5 to 3600 seconds, initial value: 1 second
Retry Settings
3.
Turn the communication retry setting ON (blue) or OFF (gray).
4.
Enter a retry interval from the following range to be used when retrying
communication.
Setting range: 30 to 3600 seconds, initial value: 30 second
2.2 Entering Environment Settings