Owner's manual

2-9
IM WX11-01E
Creating Monitor Screens with AddObserver Builder
1
2
3
4
Index
13.
To manually input the tag and color settings, click in the Att. column. The
arrow changes to
, and the tag and color settings can be entered.
• Tag and Tag Comment
Enter the tag name or tag comment.
Tag numbers of up to eitht characters can be input.
Tag comments of up to 32 characters can be input.
• Format
Enter the format type and decimal place. Click the icon on the left to toggle
between
and . is a xed-point representation, and is a oating-
point representation. The value on the right determines how many places past
the decimal point are shown. Up to 6 places can be selected.
• Minimum/Maximum/Units
Enter the maximum value, minimum value, and units for the span.
• Color
Enter the colors for the trend graph and zone bar.
Note
Be aware that If you switch back to after entering user settings, all previously entered
settings will be lost.
Adding a Channel
14.
Click the Insert button. A new channel is added to the bottom of the list.
Deleting a Channel
14.
Select the channel you wish to delete, and click the Delete button.
Deleting Unused Channels
14.
Select a range of channels. Click the Del Unused button. All unused channels in
the selected range will be deleted.
Copying a Channel
14.
Select the channel or channels you wish to copy and click the Copy button. Then
select the channel onto which you wish to paste the copied channel, and click
the Paste button. The setting information from the copied channel appears in the
selected channel.
Loading the Default Values
14.
Select the range of channels into which you wish to load the default values.
Click the Default button. The settings for all channels in the selected range are
changed to their default values.
Inset
Delete
Copy
Paste
Default
Del Unused
2.4 Entering Host and Channel Settings