Owner manual

2-17
IM WX1-07E
1
2
3
Index
Operating
Performing a Write Test
3.
Specify the Output Values of the tags on which you wish to perform the output
test in the output tab page.
4.
Select the tags on which to perform the output test
5.
Click the Output Test button.
The output values are written to registers, then the values are acquired from the
write registers and the loaded results are displayed in the loaded value column in
the output tab page.
Stopping the Read Test
6.
Click the Stop monitor button.
The Read Test is concluded.
2.5 Performing Communication Tests of Connected Devices