Owner manual

2-7
IM WX1-07E
1
2
3
Index
Operating
Tag Settings
Procedure
1.
Click the Detail Settings in the tag information column of the model you wish to
set in the Model Settings page.
Click to Tag Setting dialog box
The Tag Setting dialog box opens.
One of the following tag names that was reserved is displayed.
PV1 A/M1 R/P1/P2 TME1 TME11 C.A.M1
PV2 A/M2 HOLD TME2 TME12 C.A.M2
SP1 C.A.M PVE1 TME3 TME13 O/C
SP2 R/L1 PVE2 TME4 TME14 INPUT
OUT1 R/L2 PVE3 TME5 TME15 ADVANCE
OUT2 SPNO PVE4 TME6 TME16 RUN
HOUT1 PIDNO1 PVE5 TME7 PTNO
HOUT2 PIDNO2 PVE6 TME8 SEGNO
COUT1 R/S PVE7 TME9 TIME
COUT2 R/P/L PVE8 TME10 LSP/CAS
The tag settings include an input tab page and an output tab page.
Maximum number of input tags: 48
Maximum number of output tags: 32
The active page is surrounded by a red frame. You can click anywhere on an
input/output tab page to move the red frame.
The list of registered tags is determined by the model, control mode, control
output, and option functions. Default tag list items displayed in gray cannot be
changed. Also, the default tag list cannot be deleted.
2.2 Entering Environment Settings