Owner manual

2-4
IM WX1-07E
2.2 Entering Environment Settings
Modbus Address (for Ports Set to COM)
3.
Click an address. The Address Selection dialog box opens.
4.
Enter the Modbus address.
Modbus address: 1–99
If you will perform automati
c model determination including for the Modbus
address, choose Unknown.
Automatic Model Determination
5.
After specifying the communication methods and addresses, drag numbers to
specify the range for automatic model determination.
Automatic detection button
Clears the contents of
the status boxes.
Drag to select a range for automatic model determination.
6.
Click the Automatic detection button at the bottom of the screen, click the
Automatic determination button in the toolbar, or choose Communicati
on >
Automatic detection from the menu bar.
Model name, control mode, control output, option functions, and tag information
is automatically acquired. A loop back test is also executed at the same time.
If the test concludes without errors, a status of “OK” is displayed. (“Not OK” is
displayed if an abnormality occurred.)