Instruction Manual

2-12
IM WX1-04E
2.3 Loading Data from the OPC Server and
Transferring It to DAQLOGGER or Remote
Monitor
By running the executable function, you can connect to and acquire data from the
OPC server, then transfer that data to DAQLOGGER or Remote Monitor via Ethernet.
GateOPC’s executable function acts as the client of a DAQLOGGER or Remote Monitor
that is running as the monitor server.
Procedure
Connecting to OPC Servers
1.
Turn ON the OPC servers you wish to connect to in the Use column of the OPC
server list.
2.
Connect to the OPC servers (see page 2-3, “Connecting/Disconnecting OPC
Servers”).
Entering TCP/IP Port Numbers for Monitor Servers
3.
Choose File > Port number from the menu bar.
The PortSetting dialog box opens.
4.
Enter the port number of the DAQLOGGER or Remote Monitor to which you wish
to connect.
Note
• See the DAQLOGGER and Remote Monitor user’s manuals to obtain the correct port
numbers.
• Up to 16 GateOPCs can be connected simultaneously to DAQLOGGER or Remote Monitor.
• DAQLOGGER’s recorder model determination function identifies the system number only.