Instruction Manual

2-5
IM WX1-04E
Operating Procedure
1
2
3
Index
Displaying the OPC Server and Group Trees, and Editing Settings
1.
You can add new OPC servers (see page 2-2, “Specifying an OPC Server”).
The OPC Server window is displayed in the GateOPCConfigurator screen, and
the OPC Server Tree and Group Tree are displayed to the left of that window.
Note
The device, group, tag, items, and other information specified for the connected OPC servers is
displayed.
OPC server tree
OPC group tree
Drag the mouse pointer on these locations to change column widths
Displaying the OPC Server Tree
2.
Click the Server Root folder located to the left of the OPC server window inside
the GateOPCConfigurator screen.
The server list is displayed.
The following items are displayed.
Item ID: The added item IDs (see “Adding and Deleting Items”, 2 pages
down) are displayed.
Data Type:
The type indicated by property ID1 (item canonical data type)
(see “Adding Items to Groups” in section 3.2 for the symbol).
Access Right: The access restrictions indicated by property ID5 (item access
rights).
OPC_READABLE
Read
OPC_WRITEABLE Write
OPC_READABLE|OPC_WRITEABLE Read/Write
Unit: The string obtained from property ID100 (EU Unit).
If no property ID100 exists for the item, this cell is blank.
Description: The string obtained from property ID101 (item description).
If no property ID101 exists for the item, this cell is blank.
2.2 Entering Environment Settings