Instruction Manual

2-4
IM WX1-04E
2.2 Entering Environment Settings
Displaying the OPC Server List, Changing Settings, and Deleting Servers
Procedure
Displaying the OPC Server List
1.
Click the Show or hide OPC server list button or choose View > OPC Server List
from the menu bar.
The OPC server list is displayed.
Click a system number to display that system’s
window in the front of the screen
OPC server list
Use button
Click a cell to select it for editing
The show/hide OPC server list button
Changing OPC Server Settings
2.
Click the button in the Use column to turn the item ON or OFF (Use/Don’t use).
ON (blue)
OFF (gray)
Note
The Use button is active when running as a process or a service (see section 2.3). When
running as a process or service, you can not connect to OPC servers that are turned OFF.
3.
Click the Scan Interval box and change the value.
4.
Click the button in the Use Retry column to turn communication retry ON or OFF.
If turned ON, enter a Retry Interval.
ON (blue)
OFF (gray)
Retry interval setting range: 30–3600 seconds.
Deleting OPC Servers
2.
Select the system number of the OPC server you wish to delete.
3.
Click the Delete button.
The selected OPC server is deleted from the list.