User Manual

Quick Settings

Usingthequicksettingsfunction,youcanswitchquicklytothemeasurementchannel

(measurement range and alarm) and data save configuration screens by pressing T/DIV.

Procedure

OperatetheMVfromtheQuicksettingsscreenaccordingtotheproceduredescribed

below.

• Measurementchannels: Setchannels1through4tothefollowingsettings:

Mode:Volt,Range:2V,Span_L:-2V,Span_U:2V

• Display-datasavesettings:Trend/Storageinterval:1min,Saveinterval:1h

• Eventdatasavesettings: Samplerate:1s,Mode:Free(mem.samplingstartedwith

START/STOPkey),Datalength:1h

List of default RD-MV1000 settings: page 36

Press MENU.

Press the left arrow key.

Press T/DIV.

Set the measurement range

1. Select the channels to configure.

Press 1 for the first channel and 4 for the last channel.

2. Select the Mode.

Press the Volt soft key.

3. Select the Range.

Press the 2V soft key.

4. Enter the span upper and lower limits.

Press the Input soft key, and select a value with the

up and down arrow keys.

M-4661