User Manual

Turning the Power ON/OFF

Turning the Power ON

CAUTION

BeforeturningONthepowerswitch,checkthat

• Thepowercord/wiresareconnectedcorrectlytotheMV.

• TheMVisconnectedtothecorrectpowersupply.

If the input wires are connected in parallel with other devices, do not turn the power

switch of the MV or another device ON or OFF during operation. This can have

adverse effects on the measured values.

Turn ON the power switch.

After the MV performs a self-test for a few seconds, the operation screen appears.

CAUTION

• IfnothingisdisplayedwhenthepowerswitchisturnedON,turnthepower

switchOFFandcheckthepointslistedaboveonemoretime.Afterchecking

thepoints,turnthepowerswitchONagain.IftheMVstilldoesnotwork,itis

probably a malfunction. Contact your nearest Omega dealer for repairs.

• Ifanerrormessageisdisplayedonthescreen,refertosection12.2,

“Troubleshooting,” in the RD-MV1000/RD-MV2000 User’s Manual,andtakethe

appropriate measures.

• TurnONthepowerswitch,lettheMVwarmupforatleast30minutes,andthen

start measurement.

Turning the Power OFF

CAUTION

BeforeturningOFFthepowerswitch,checkthattheexternalstoragemediumis

not being accessed.

Turn OFF the power switch.

Connecting a Power Cable

M-4661