User guide

M-4662
2-29
UsingtheEthernetInterface
1
2
3
4
5
6
7
App
Index
ConguringtheSNTPServer
You can configure the MV to run as an SNTP server.
◊ Press MENU and then select Menu tab > Basicsettingmode > Menu tab >
Communication(Ethernet) > Server
• SNTP
Set the SNTP parameter under Server to Use or Not (don’t use).
When an SNTP client on the network queries the MV for the time information, the MV
returns the time information.
PortNumber
The default value is 123. To change the value:
◊ Press MENU and then select Menu tab > Basicsettingmode > Environment tab >
Communication > Serviceport
For the selectable range, see section 7.1.
2.7 Synchronizing the Time