User guide

M-4662
2-11
UsingtheEthernetInterface
1
2
3
4
5
6
7
App
Index
SettingthePOP3ServerConnection
Specify the operation for connecting to the POP server.
◊ Press MENU and then select Menu tab > Basicsettingmode > Environment tab >
Communication > POP3Details
Senddelay[second]
Enter the wait time from POP3 server authentication until transmission. Set a value in the
range of 0 to 10 (seconds).
POP3Login
To send the POP3 server login password without encryption, set POP3Login to PLAIN.
To send the password with encryption, set POP3Login to APOP.
E-mailTest
◊ Press FUNC and then select E-mailtest > Recipient1 or Recipient2
You can send a test e-mail to check the e-mail settings.
Enabling/DisablingtheE-mailTransmissionFunction
EnablingtheE-mailTransmissionFunction
◊ Press FUNC and then select E-Mailstart
The e-mail transmission function is enabled.
DisablingtheE-mailTransmissionFunction
◊ Press FUNC and then select E-Mailstop
The e-mail transmission function is disabled. Unsent e-mail messages are discarded.
E-mailRetransmission
If an e-mail transmission fails, the MV retransmits the message up to three times at
30-s, 1-minute, or 3-minute intervals. If retransmission fails, the MV discards the e-mail
message.
2.3SendingE-mailMessages