Owner manual

ManualsBrandsYokogawa ManualsSensorsButton Operated MV2000

231

232

233

234

235

236

237

238

239

240

10-19

IM MV1000-01E

Computation and Report Functions (/M1 and /PM1 options)

App

Index

• Report set > Date/Day of the week, Time (hour)

Set the date or day of the week and the time when the report will be generated. The

specied date/time is when the report le is divided. Set the values in the range

indicated below. Items with a dash are invalid.

Report Type Date Day of Week Time

Hour - - 0 to 23

Day 1 to 28* - 0 to 23

H+D - - 0 to 23

Day+Week - SUN to SAT 0 to 23

D+M 1 to 28* - 0 to 23

You cannot specify 29, 30, or 31.

Report Filing Time and Date/Time When a Report File Is Divided

Example: When the Date of a daily report is set to 1 and the Time (hour) is set to

18:00

A daily report is created every day at hour 18.

The le that the report is stored to is divided at 18:00 on day 1 of each month.

• Report channel number

Determines the order in which reports are output.

• Report CH > On/Off

Select On to use the report channels.

• Report CH > Channel

Set the channel to be assigned to the report channel. All channels can be assigned,

but reports are not generated for channels set to Skip or Off even if they are assigned.

In a stacked bar graph display (see section 5.6 for details), the MV shows report data

for each group indicated below. However

, the MV displays only channels with the

same unit as the rst channel in the group.

Report Group MV1004,

MV1008,

MV2008

MV1006, MV1012,

MV1024

MV2010, MV2020,

MV2030, MV2040,

MV2048

1 R001 to R006 R001 to R006 R001 to R010

2 R007 to R012 R007 to R012 R011 to R020

3 - R013 to R018 R021 to R030

4 - R019 to R024 R031 to R040

5 - - R041 to R050

6 - - R051 to R060

• Report CH > Sum scale

Select the sum scale from /s to /day to match the time unit of the measured value.

Example: If the unit of the measured value is m

/min, select /min.

Off: Directly sums the measured data for each scan interval.

Procedure

• Start/Stop Report Generation

Report generation starts when memory sampling starts. Report generation stops when