Manual
IM MV1000-17E
2-42
Conguring the MV1000 Client (Modbus client)
The description below assumes that settings other than destination server settings and
commands are at default values.
Registering the Destination Server
The example below describes the settings used to register the MV1000 server to number 1.
The MV1000 server IP address is assumed to be 192.168.1.101.
◊ Press MENU and then select Menu tab >
Basic setting mode > Menu tab >
Communication (Ethernet) > Modbus client > Modbus server settings
Parameter Setting
Port 502
Modbus server name 192.168.1.101
Unit Auto
Setting Transmission Commands
◊ Press MENU and then select Menu tab > Basic setting mode > Menu tab >
Communication (Ethernet) > Modbus client > Command settings
Parameter Setting
Command type R-M
First and Last C01
Server 1
Regi. 30001
Type INT16
2.10 Usage Example of the Modbus Function