Manual

5-32
IM MV1000-17E
5.4 Instrument Information Output Format
This section describes the instrument information output format of the instrument
information server.
Note
“
CRLF
” used in this section denotes carriage return line feed.
Response
The response packet will contain parameter values according to the following format.
EACRLF
(Parameter 1)
_=_
(value of parameter 1)
CRLF
(Parameter 2)
_=_
(value of parameter 2)
CRLF
·····································
ENCRLF
•
The MV returns the parameter values in order as specified by the command
parameter.
• The output order of the parameters is not fixed when
all
is specified.
•
If the same parameter is specified multiple times, the MV returns a response only
to the first one.
• Lower-case characters are used for parameters.
• An underscore (
_
) indicates a space.
The following table shows the parameter types.
Parameter Output Information
serial
Serial number
host
Host name
ip
IP address
Output Example
Several output examples are indicated below.
Packet Parameter Sent as Commands Response
Parameters are not case sensitive.
ip HoSt EA
ip = 192.168.111.24
host = MV2000
EN
If the same parameter is specified multiple times, the MV returns a response only to the first one.
host ip host ip host EA
host = MV2000
ip = 192.168.111.24
EN
Undefined parameters will be ignored.
(Space)
EA
EN