Manual

4-34
IM MV1000-17E
YQ Sets the application timeout
To not use the timeout feature
Syntax
YQ p1<terminator>
p1
Application timeout (OFF)
Query
YQ?
Example Disable timeout.
YQOFF
Description
The settings specified with this command take
ef
fect when you save the settings with the XE
command and power-cycle the MV
.
To use the timeout feature
Syntax
YQ p1,p2<terminator>
p1
Application timeout (ON)
p2
T
imeout value [minutes] (1 to 120)
Query
YQ?
Example
Enable the application timeout and set the
timeout value to 3 min.
YQON,3
Description
The settings specified with this command take
ef
fect when you save the settings with the XE
command and power-cycle the MV
.
YT Sets the FTP transfer timing
Syntax
YT p1,p2,p3<terminator>
p1
Auto transfer when display and event data
files are generated (ON/OFF)
p2
Auto transfer when report data files are
generated (ON/OFF)
p3
Auto transfer when snapshot data files are
generated (when snapshot is executed) (ON/
OFF)
Query
YT?
Example
Auto transfer display and event data files. Do not
transfer report data files. Do not transfer image
data files.
YTON,OFF,OFF
Description
If the method to save data to an external storage
medium is set to
Auto, the MV automatically
transfers data files as they are generated.
For media storage settings, see the MV1000/
MV2000 User
’
s Manual.
YU Sets the contents to be sent via
e-mail
To send changes in the alarm status
Syntax
YU p1,p2,p3,p4,p5,p6,p7,p8,p9,p10,
p11,p12<terminator>
p1
T
ransmitted content (ALARM)
p2
Recipient 1 ON/OFF
p3
Recipient 2 ON/OFF
p4
Alarm transmission of alarm number 1 ON/OFF
p5
Alarm transmission of alarm number 2 ON/OFF
p6
Alarm transmission of alarm number 3 ON/OFF
p7
Alarm transmission of alarm number 4 ON/OFF
p8
Include instantaneous data ON/OFF
p9
Include source URL ON/OFF
p10
Subject (up to 32 alphanumeric characters)
p11
Header 1 (up to 64 characters)
p12
Header 2 (up to 64 characters)
Query
YU[ p1]?
Example Transmit alarms of alarm numbers 1 to 4
including instantaneous data but not including
the source URL to recipient 1. Set the subject to
“ALM” and header 1 to “LP2.”
YUALARM,ON,OFF,ON,ON,ON,ON,ON,OFF,AL
M,LP2
To send e-mail at scheduled times
Syntax
YU p1,p2,p3,p4,p5,p6,p7,p8,p9,p10,
p11,p12<terminator>
p1
Transmitted content (TIME)
p2
Recipient 1 ON/OFF
p3
Interval for sending e-mail to recipient 1
(1H, 2H, 3H, 4H, 6H, 8H, 12H, 24H)
p4
Time
when e-mail is sent to recipient 1 (00:00
to 23:59)
p5
Recipient 2 ON/OFF
p6
Interval for sending e-mail to recipient 2
(1H, 2H, 3H, 4H, 6H, 8H, 12H, 24H)
p7
Time when e-mail is sent to recipient 2 (00:00
to 23:59)
p8
Include instantaneous data ON/OFF
p9
Include source URL ON/OFF
p10
Subject (up to 32 alphanumeric characters)
p11
Header 1 (up to 64 characters)
p12
Header 2 (up to 64 characters)
Query
YU[ p1]?
Example Send e-mail at 17 hours 15 minutes every day
to recipient 1. Do not include instantaneous data
but include the source URL. Set the subject to
“GOOD” and header 1 to “LP2.”
YUTIME,ON,24H,17:15,OFF,,,OFF,ON,
GOOD,LP2
To send system notifications
Syntax
YU p1,p2,p3,p4,p5,p6,p7<terminator>
p1
Transmitted content (SYSTEM)
p2
Recipient 1 ON/OFF
p3
Recipient 2 ON/OFF
p4
Include source URL ON/OFF
p5
Subject (up to 32 alphanumeric characters)
p6
Header 1 (up to 64 characters)
p7
Header 2 (up to 64 characters)
Query
YU[ p1]?
Example Send system notification e-mail messages
including the source URL to recipient 1. Set the
subject to “SystemAlert” and header 1 to “LP2.”
YUSYSTEM,ON,OFF,ON,SystemAlart,LP2
To send report generation notifications
Syntax
YU p1,p2,p3,p4,p5,p6,p7<terminator>
p1
Transmitted content (REPORT)
p2
Recipient 1 ON/OFF
4.6 Basic Setting Commands