Owner manual

Menu Tab

Alarm

Setting Selectable Range or Choices Default Value

Basic setting

Reflash On/Off Off

Rate of change > Decrease 1 to 32 1

Rate of change > Increase 1 to 32 1

Indicator Hold/Nonhold Nonhold

Switch, Relay

Internal Switch > AND None/S01/S01-S02/…/S01-S29/S01-S30 None

Relay > AND None/I01/I01-I02/…/I01-I15/I01-I16 None

Relay > Action Energize/De_energize Energize

Relay > Hold Hold/Nonhold Nonhold

Relay > Relay Action on ACK

Normal/Reset Normal

Hysteresis

Meas CH > High/Low Numeric value (0.0 to 5.0) 0.5

Meas CH > Delta High/Low Numeric value (0.0 to 5.0) 0.0

Math CH > High/Low Numeric value (0.0 to 5.0) 0.0

Ext. CH > High/Low Numeric value (0.0 to 5.0) 0.0

A/D, Memory

Setting Selectable Range or Choices Default Value

Scan interval > Scan mode Normal/Fast Normal

Normal > Scan interval 125ms/250ms (MV2008) 125ms

1s/2s/5s (MV2010, MV2020, MV2030, MV2040, MV2048) 1s

Normal > A/D integrate Auto/50Hz/60Hz/100ms Auto

Fast > Scan interval 25ms (MV2008) 25ms

125ms (MV2010, MV2020, MV2030, MV2040, MV2048) 125ms

Fast > A/D integrate 600Hz 600Hz

Memory

Data kind Display/E+D/Event Event

Burnout, RJC

Setting Selectable Range or Choices Default Value

First-CH, Last-CH Numeric value (channel number) 001 to 048 001

Burnout

Mode Off/Up/Down Off

RJC

Mode Internal/External Internal

Volt Numeric value (–20000 to 20000)µV 0

Default MV2000 Settings

IM MV2000-02E