Owner manual

Entering Values and Characters
The character/number input keys and DISP/ENTER key are used to set the date/time,
set the display span of the input range, set tags, set message strings, enter passwords,
etc.
DISP/ENTER key and four arrow
keys (up, down, left, and right)
Character/Number input keys
Entering Values
When a window for entering a value appears, enter the value by performing the following
key operation.
• Left and right arrow keys: Selects the input position.
• Character/Number input keys:
Enters a value.
The following soft key appears when it can be used.
• Space soft key: Enters a space.
Entering Character Strings
Use the following keys when a window for entering a character string appears.
• Left and right arrow keys: Select the input position.
• Character/Number input keys: Enter a character string.
The character to be entered is determined by the number of times the character type key
and the character/number input key is pressed. The character types that can be entered
vary depending on the item being set.
Input status of the A/a/1 soft key
Input status of the Ins soft key
• Space soft key: Enters a space.
• Del soft key: Deletes the character at the cursor.
• Bs soft key: Deletes the character before the cursor.
• Ins soft key: Selects insert or overwrite.
The Ins soft key switches between insert and overwrite mode. The
selected mode is shown on the right side of the soft key display
section.
•
A/a/1 soft key: Selects uppercase alphabet (A), lowercase alphabet (a), or value (1).
The character type that you can enter changes each time you press
the A/a/1 soft key. The selected character type is shown on the right
side of the soft key display section.
Basic Operation
17
IM MV2000-02E