Instruction Manual

4-37
IM 04L47B01-01EN
1
2
3
4
5
IndexIndex
Data Display Methods
Printing digital values
Headers are added before printing. For single batches, the same headers are added as
for waveforms. If printing extends for multiple pages, headers are added to all pages.
The restriction on printing digital values is up to 5 million data.
If 5 million data are exceeded, the print preview and print menus are disabled.
Mark/message list printing
Mark/message printing is possible only when the alarm list and mark/message window
are active and marks/messages are displayed. The print range is the cursor range or the
entire range.
For single batches, the same headers are added as for waveforms. If printing extends for
multiple pages, headers are added to all pages.
Alarm list printing
Alarm list printing is possible when the alarm list and mark/message window are active
and an alarm tab is displayed. The print range is the cursor range or the entire range.
For single batches, the same headers are added as for waveforms. If printing extends for
multiple pages, headers are added to all pages.
Printing of calculation results and cursor values
Calculation results and cursor values can be printed only when the waveform display
screen is active and the calculation results dialog box is displayed.
When the cursor values and the calculation results reach one half of the height of the
printing paper, the cursor values and the calculation results are not printed on the same
page as the waveform, but on a different page.
Headers when printing
DX/DXAdvanced/MVAdvanced print headers
Graph name:
Batch name: Batch No+Lot No.
File message:
Instrument name: Serial No.:
Instrument type: Acquisition interval:
Start time: Start Cond.:
Stop time: End Cond.:
Time Correction: Data Count:
Range:
Comment:
4.10 Data Printing