Instruction Manual

4-36

IM 04L47B01-01EN

4.10 Data Printing

Printer setting

Procedure

Select File > Print Settings from the menu bar.

The “Print Settings” dialog box is displayed.

Set the items by selecting from the list box or by input into a text box.

Explanation

The active screen (waveform display screen, alarm list, mark/message list) is printed.

The display of alarm lists and mark/message lists is switched by tabs, and the displayed

list is printed.

The print setting items and the contents are as shown below.

Setting item Contents

Range All, cursor range

Color Color

Group View group (fixed)

Span All data/1 page, 1 hour/1 span, 8 hours/1 page, 12 hours/1 page

Hour/page When selecting Set freely for [Span], you can set the print span per

page.

Waveform thickness 0.25 pt, 0.5 pt, 1.0 pt, 1.5 pt, 3.0 pt

Printing comment Input is possible for up to 250 single-byte characters (printing is done

to the upper part of the waveform print).

Note

• In case of printing onto multiple pages by print span setting, the cursor values and the

calculation results are also printed from the second page on.

• Depending on the number of Y-axes and the size of the printing paper, waveforms may not

be printed.

Printing the waveform display screen

The waveform display screen can be printed only when the waveform display screen is

active. When the same screen has 10 or more Y-axes in case of waveform printing, the

axes from the tenth one on are not printed.

When the cursor values and the calculation results reach one half of the height of the

printing paper, the cursor values and the calculation results are not printed on the same

page as the waveform, but on a different page.

If the displayed waveform is a single continuous data, headers are added. For

information on header information, see “Headers when printing” in this section.