Instruction Manual

4-32
IM 04L47B01-01EN
Conversion format for data being displayed as waveforms
If cursors are displayed, only the data in the cursor range is converted.
Conversion format when tags of multiple files are displayed
1 DAQManager Rx.xx.xx
2
3 Graph name Graph 3
4 Start time 2009/3/25 18:23:39 0.000
5 Stop time 2009/3/25 18:23: 40 0.000
6 Group name Group 01(01)
7
8 Channel
name
CH005
9 Tag name ato5
10 Tag no. Tag1
11 Unit °C
12 Date Time Sec. Min Max
13 2009/3/25 18:23:39 0.000 552.7 +OVER
14 2009/3/25 18:23:40 0.000 552.7 +OVER
If it is the same start/stop (single batch), the conversion format becomes “conversion format
when a single tag is displayed,” below.
Convers
ion format when a single tag is displayed
1 DAQManager Rx.xx.xx
2
3 Batch name Batch No.+Lot No.
4 File header HEADER
5 Instrument type DX200
6 Serial No. SERIAL_300
7
8 Time Correction None
9 Start time 2009/7/13 12:55:40 0.000
10 Stop time 2009/7/14 12:55:45 0.000
11 Start Cond. AUTO
12 End Cond. AUTO
13 Acquisition interval 1 sec
14
15 Graph name Graph 3
16 Start time 2009/7/13 12:56:39 0.000
17 Stop time 2009/7/13 18:23:40 0.000
18 Group name Group 01(01)
19
20 Batch text 1 App Name
21 Batch text 2 Supervisor
22 Batch text 3 manager
23 Batch text 4
24 Batch text 5
25 Batch text 6
26 Batch text 7
...
43 Batch text 24
44 Batch Comment 1 Comment 2009/7/13 12:55:40 0.000 Admin1
45 Batch Comment 2
46 Batch Comment 3
47
48 Channel name CH001
49 Tag name TAG1
50 Tag no.
51 Unit V
52 Date Time Sec MIN MAX
53 2009/7/13 12:55:40 0.000 0.0000 0.0000
54 2009/7/13 12:55:41 0.000 0.0000 0.0001
4.9 Data Format Conversion