Instruction Manual

4-31
IM 04L47B01-01EN
1
2
3
4
5
IndexIndex
Data Display Methods
Specifications for Excel conversion by file, and automatic Excel conversion of watch data
Item Description
Format Excel98 worksheet
Channel
specification
Fixed to All Channels
File name Datafilename.xls
If the Excel limit (65536 rows) is exceeded:
Serial number is assigned to
the file, and the conversion
results are divided
If files of the same name occur:
Serial number assigned to
the file
If the Excel limit (256 columns) is exceeded:
Divided into separate sheets
within the same file
Conversion of marks/
messages
Added as a separate sheet within the same file sheet name: marklist
Alarm conversion Added as a separate sheet within the same file sheet name: alarmlist
Spec
ifications for text conversion by file, and automatic text conversion of watch data
Item Description
Format Tab delimited
Channel
specification
Fixed to All Channel
File name Filename.txt
If a file of the same name exists:
Serial number assigned to
the file
Conversion of marks/
messages
File name: datafilename_marklist.txt
Alarm conversion File name: datafilename_alarmlist.txt
Note
• The group No. set for the presently displayed group is the initial setting for the group
specification.
• The save destination file name becomes the displayed file name with automatic addition
of an extension identifying the data format. The extension “txt” is added in case of text
conversion, and the extension “xls” is added in case of Excel conversion.
• Excel has restrictions for the number of data which can be handled. Even when the number
of data to be converted is below the restriction, data may not be read in when the free
memory of the personal computer is not sufficient. When the limit is exceeded, conversion
output is made with automatic division. A consecutive number is added to the file name.
• As saving takes time, do not specify an exterior medium such as a floppy disk etc. as the file
write target.
• Do not specify a root directory for the file save destination.
• Reserve a sufficient free disk capacity as the write target.
• If converting waveforms with a large number of groups, it is possible that the Excel data
cannot be read in. In such a case, divide the range of the specified groups and create
conversion data. For example, in case of 30 groups, divide into groups 1-10, 11-20, and
21-30 and convert to Excel.
4.9 Data Format Conversion