Instruction Manual

4-30
IM 04L47B01-01EN
Explanation
If the data targeted for conversion that is being waveform displayed has multiple intervals
and no values, you can specify to use nearby data to fill it in, or to leave it blank. Event
data is filled in with previous values, and display data is filled in with subsequent values.
For [Cell without value] in the conversion dialog box, set [Padding] or [Not padding].
Regarding alarms, marks, and messages, conversion results are saved to separate
sheets within the same file.
Settings for Excel/Text conversion of data under waveform display
Setting item Description
Start tim Cannot be changed
When cursors displayed:
time at left cursor position
When cursors not displayed: start time
Stop time Cannot be changed
When cursors displayed:
time at right cursor position
When cursors not displayed: stop time
Specify group Set from 1 to 50 groups
Cell without value Fill with previous values, fill with subsequent values, or leave blank
Set convers
ion to Excel or text by file (same as automatic conversion of watch folder)
Setting item Description
Number of steps Specify the number of steps of data to convert
Number of steps specification range:
unlimited, default is 1 step
1 step: all data converted
1st data must be converted
Folder Specify location for changed data
Excel and text conversion specifications
Data is converted to Excel or text per the following specifications. Conversion
specifications for watch data are the same as those for conversion by file.
Specifications for conversion to Excel of data under waveform display
Item Description
Format Excel 98 worksheet
Group Separated by sheet
Initial file name setting When converting from waveform display screens: graph.xls
Restriction If the limits of Excel are exceeded, conversion results are assigned a
serial number and divided
Alarm/mark conversion Marks and alarms are converted at the same time as the waveform
conversion, and saved to a separate sheet in the same file
Spec
ifications for conversion to text of data under waveform display
Item Description
Format Tab delimited text file
Group Files divided
File name: filename_groupname(group number).txt
Example: Graph1_Group1(01).txt
Initial file name setting When converting from waveform display screens: graph.txt
Restrictions If the limits of Excel are exceeded, conversion results are assigned a
serial number and divided
Alarm/mark conversion Marks and alarms are also converted and saved when waveforms
are converted
Mark file:
filename_marklist.txt
Alarm file: filename_alarmlist.txt
4.9 Data Format Conversion