Instruction Manual

2-21
IM 04L47B01-01EN
1
2
3
4
5
IndexIndex
File Management Functions
2.4 Setting summer time
When searching for data with summer time setting of the DXAdvanced unit, the
MVAdvanced unit, and the FX100 unit search can be performed with application of
summer time to the time of the imported files.
Procedure
1.
Select File > DST setting from the menu bar.
The “DST setting” dialog box is displayed.
2.
Check one of the check boxes “Do not use DST”, “Use the DST setting of the
OS”, and “Set DST.”
3.
When “Do not use DST” or “Use the DST setting of the OS” is checked, go to step 5.
When “Set DST” is checked, the setting screen becomes active. Go to step 4.
4.
Select the start time and the end time for summer time from the list box after
clicking the respective text box.
5.
Click the [OK] button.
Explanation
The DST setting is applied to all imported files and all years.
The setting range is shown below.
Setting item Contents
Summer time start Month January to December
Week 1st to 4th, last
Weekday Sunday to Saturday
Hour 0 to 23
Summer time end Month January to December
Week 1st to 4th, last
Weekday Sunday to Saturday
Hour 0 to 23
When files recorded with DXAdvanced, MVAdvanced, or FX100 set to summer time are
imported, the time becomes standard time. When DAQManager is set to summer time,
the summer time setting of DXAdvanced, MVAdvanced, or FX100 should be matched.