Owner's manual

20
4.5.2. Setting the Channel Display of the Current Value Mark
1. Press MENU (switch to the setting mode).
2. Hold down FUNC for 3 s to switch to the basic setting mode.
3. Select Environment > AUX.
4. Set item 1 under AUX to On (two digits, special setting) or Off (three digits,
standard setting).
Setup Screen Example for the Channel Display of the Current Value Mark
(DX1000(N) Example)
Table 4-5 Setting the Channel Display of the Current Value Mark
AUX Setting Selectable Items
(Selectable Range)
Description
1 On/Off Channel display of the current value mark
Off: Three digits (standard setting)
On: Two digits (Special setting)
2 On/Off Not used
3 On/Off Not used
4 On/Off Not used
4.5.3. Communication Commands
WU p1,p2,p3,p4,p5 <terminator>
¾ p1: Setup type (AUX)
¾ p2: Channel display of the current value mark (On: two digits, Off: three
digits)
¾ p3: Not used (On/Off)
¾ p4: Not used (On/Off)
¾ p5: Not used (On/Off)