Owner's manual

4.1.3. Setting the Display Freeze Function

1. Press MENU (switch to the setting mode).

2. Select Timer, Event action > Event action.

3. Set the Logic box number, Event (set to Remote), and Remote number.

4. In the Action box, press the Freeze soft key.

Setup Screen Example for the Display Freeze Function (DX1000(N) Example)

4.1.4. Operation While the Display is frozen

If the DX is in a state in which it can switch to the basic setting mode, the DX can

switch to the mode even while the display is frozen.

¾ The display freeze function is released when switching back to the operation

screen from the basic setting mode.

If the power turns OFF and then back ON such as due to a power failure while the

display is frozen (closed state) through remote control, the display freeze function is

released even if there is no change in the remote state (remains at the closed

state).

The automatic display revert function does not operate.

¾ The automatic revert timer is restarted when the display freeze function is

released.